|
Sat, Jan 12, 13 at 6:48
| Does anyone know anything about a 3 speed + reverse vintage Wizard tiller? I have a GIS 2045 A47, 8 HP. About a 1973. All I can find are 2 speeds and the smaller single speed. Belt pulley setup is not the same as mine. Thanks |
Follow-Up Postings:
|
- Posted by bill_kapaun Z8 Orygun (My Page) on Sat, Jan 12, 13 at 12:16
| Just guessing here, but I would look for Gilson from the numbers you provided. They made a bunch of tillers for MW also, so you might search the threads for those model#'s. |
|
- Posted by gator_rider2 z8 Ga. (My Page) on Sat, Jan 12, 13 at 14:39
| 1-800-328-0259 That a Toro number call see if they help. Toro bough out you tiller and has help people in pass. |
This post was edited by gator_rider2 on Sat, Jan 12, 13 at 14:42
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.