|
Mon, Jan 18, 10 at 9:28
| I have an Ariens ST 824. Today was in the middle of blowing when the drive train went funky.
Basically when put in gear the tires wouldnt go, and or were sporadic, in both forward and reverse. They werent getting any power to them. The blower when engaged worked fine. So I assume the belts are fine...will check tonight when I get home. Does anyone have any guesses? |
Follow-Up Postings:
|
| If belts seem good, pull the bottom cover and take a look at the friction disc. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.