Return to the Tool Shed Forum | Post a Follow-Up

 o
fg100 tiller clutch cable

Posted by fatsweat tn (My Page) on
Wed, Jan 11, 12 at 15:16

The clutch cable came off by the carburetor. It appears the screw has a slot and I guess I need to put the wire/cable back into the slot. I assume its a press fit but not sure. Can anyone instruct me how to get this fixed?
Thanks in advance.


Follow-Up Postings:

 o
RE: fg100 tiller clutch cable

  • Posted by ericwi Dane County WI (My Page) on
    Thu, Jan 12, 12 at 16:57

You might be dealing with a type of clamp. There is a bolt, which has been drilled, with a hole large enough for the clutch cable to pass through. There will also be a washer, and a nut, that fits the threads on the end of the bolt. So you thread the cable through the bolt, and then put the bolt on the arm that operates the clutch. The washer and nut are added, and the nut is tightened down. Does this describe the parts you have in hand?


 o
RE: fg100 tiller clutch cable

Yes, except the bolt has a slot. I have glued the end of the cable in the slot and now it works perfectly.

Thanks for your help.


 o
RE: fg100 tiller clutch cable

  • Posted by ericwi Dane County WI (My Page) on
    Thu, Jan 12, 12 at 23:15

I looked up the Honda tiller that you have, and learned that the throttle is controlled by cable. The clutch is a centrifugal type, disengaged when the engine is at idle, and automatically engaged when the engine revs up, maybe 1500 rpm or so.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here