Return to the Tool Shed Forum | Post a Follow-Up

 o
Adjusting a McCullough electromatic chainsaw's break.

Posted by loger (My Page) on
Wed, Jan 26, 11 at 21:10

Adjusting a McCullough electromatic chainsaw's break.

What causes the break to stop the saw w/o touching the break's bar (vibration or pressure on bar's tip)? Or! Is it a cleaning or adjustment matter? So far adjusting in both directions has not helped. Do you know of a link that shows how the adjustment works? Electromatic 12" Chainsaw # EM12A. This is a quiet alternate to starting a gas saw for minor cutting of about 6" and smaller wood shorter. Thanks for any info in advance. loger


Follow-Up Postings:

 o
RE: Adjusting a McCullough electromatic chainsaw's break.

Holy molly chain break on an elect. 12" chaing saw, what's next a completely enclosed chain guard? I know what I would do it if was mine! Ole sckool


 o
RE: Adjusting a McCullough electromatic chainsaw's break.

Rcmoser, I feel the chain break heard your suggestion. Plus, knowing I'm just as Old School or Older, no problems since. LOL. The Monster has not faltered once since I torqued it above what I would have expected. If it ever falters again, the noise you'll hear will be the chain break coming off. Take Care! loger

PS. The Monster Gets Small Jobs Done vs Pulling A Gas Saw.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here