Return to the Tool Shed Forum | Post a Follow-Up

Murray Snowblower repair

Posted by lenrosenberg none (My Page) on
Thu, Feb 3, 11 at 12:08

I have a murray model # 627804X6 two stage snowthrower. The traction assembly (part #579941, also known as part #579941E701MA, or listed as part #190 on the schematic) broke. I ordered the part, but am unsure how to replace it. Anyone have experience with this? Thanks. Len

Follow-Up Postings:

RE: Murray Snowblower repair

One would hope you could remove the spring and the e clip on each side and manuver it out. I don't know if it is that simple or if the bearing assy will be in the way.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here