Return to the Tool Shed Forum | Post a Follow-Up

 o
honda hs624 snow blower

Posted by loumagoo (My Page) on
Tue, Feb 9, 10 at 12:52

I have been trying to get my snow blower started. I have emptied the gas tank, put in sea foam to clean out the tank and put in new gas. The snow blower still does not start. I took off the cover to the carberator and put gas into the carberator. It starts for a few seconds but will not stay running. Any suggestions. Thanks


Follow-Up Postings:

 o
RE: honda hs624 snow blower

Sounds like you need to flush fresh fuel through the line and give the carb at least a quick clean. How depends on what engine you have. There are lots of resources in the tool forum also.


 o
RE: honda hs624 snowblower-

Duh, obviously a Honda engine. In the Mower forum a few threads down- there is a description on the Honda carb. Good luck. Also, double check the fuel valve is on...


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here