Return to the Tool Shed Forum | Post a Follow-Up

 o
Troy Bilt Horse Tine Shims

Posted by ironeagle1 Ohio (My Page) on
Fri, Feb 26, 10 at 13:18

I have an mid 70's Horse. I'm looking for tine shims to tighten up the tines on the tine holder. Mtd does not make these parts any longer. If anyone has any info or has a set of shims or even one shim that I could use as a patern or knows where to buy a tine holder right side cheap. I'm trying not to spend $$$ on a new tine holder.
Thanks Mike


Follow-Up Postings:

 o
RE: Troy Bilt Horse Tine Shims

  • Posted by mla2ofus z7b Tom Green Co.,Tx (My Page) on
    Fri, Feb 26, 10 at 14:34

Do you mean the bolt holes for the tines have gotten eggshaped?
Mike


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here