Return to the Tool Shed Forum
| Post a Follow-Up
jd 726 engine problem
| | |
Posted by shirtguy (My Page) on Tue, Feb 9, 10 at 14:06
| I must own the snowblower from hell. Today while going through 4 ft drift I hear clink very regularl. Then a cluck and it died. I hear the engine trying to start but nothing. Sounds like something inside the engine. Any suggestions. Piston rod maybe. |
Follow-Up Postings:
RE: jd 726 engine problem
| | |
| Got cylinder head off. When I cranked the engine the piston did not move. Rods were fine. I'm thinking its the connecting rod. How do I get to this? Thanks Bruce |
RE: jd 726 engine problem
| | |
- Posted by canguy British Columbia (My Page) on
Tue, Feb 9, 10 at 22:23
| Yup, the connecting rod has grenaded.What are the engine model and type numbers? You could remove and disassemble the engine but then what? Probably farther ahead to install a short block if available or a new engine. |
RE: jd 726 engine problem
| | |
| CG : Sound like an another older Unit right ? Time for a China Clone ? lol ! |
|
|
|
|
