Return to the Tool Shed Forum | Post a Follow-Up

 o
husqvarna problems!

Posted by crazedgriz none (My Page) on
Tue, Feb 28, 12 at 22:57

i can get my 268xp to start if i empty the fuel tank and pore a tad in the cylinder but if i put gas in the tank it just floods out and will not start. any advise?


Follow-Up Postings:

 o
RE: husqvarna problems!

usually that's the carb. needle not seating against the seat to cut the fuel off. but it could be diapharmn or spring problems not seating on the needle thus not putting the pressure required to seat the needle to seal off fuel when the engine is not running or your not pulling the rope?


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here