Return to the Tool Shed Forum | Post a Follow-Up

 o
Briggs Power Bilt Head Gasket:

Posted by bushleague MA (My Page) on
Sun, Mar 2, 14 at 7:28

A buddy brought over his Briggs Power Bilt OHV powered Craftsman snowthrower due to not starting.

A quick pull of the starter rope told me that there was little compression, and I could hear a leak near the cylinder head. I removed the head, and the gasket was literally burned through in two places.

I ran the numbers (12S432 0036-F8) and found an IPL on the B&S site, OEM head gasket is 698210. I had a 791716 in the B&S box, the fit is exact, including the bore. The surface of the gasket is raised, should this face the head?

As far as burning through gaskets, I suspect a lean condition, as I didn't see a mouse house or other debris.


Follow-Up Postings:

 o
RE: Briggs Power Bilt Head Gasket:

The gasket you have is for the 15" engines, not the 12". I think you are missing a hole in that gasket as well.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here