Return to the Tool Shed Forum | Post a Follow-Up

 o
Troybuilt tiller

Posted by safrits NC (My Page) on
Wed, Mar 31, 10 at 18:40

I have an early 80's Troybuilt tiller with tines in the rear. I need belt for it but don't know what size it is. The serial number is 716310 but I don't know what the model number is. Can anyone help me. Thanks


Follow-Up Postings:

 o
RE: Troybuilt tiller

  • Posted by rej2 Z5 (My Page) on
    Wed, Mar 31, 10 at 22:34

Your tiller was made between March-April 1984, Horse III PTO model.Sometimes called a four speed Horse. It has two sets of pulleys but requires only one belt, Troy Bilt part# 9245. Do not substitute. Single belt is moved from one set of pulleys to the other to provide different speeds. With the Fast-Slow speed lever and the two sets of pulleys you have four speeds with the one belt. Ebay is a great source of genuine parts and manuals.Happy tilling. Do yourself a favor and get an operators manual, these machines are very easy to work on, and the manuals are written to make it even easier. REJ2


 o
RE: Troybuilt tiller

safrits, rej2 is correct; the TroyBilt part number is 9245. TroyBilt is now owned by MTD, and I heard varying reports about whether they are providing parts support for the old Gardenway TroyBilts.

As rej2 said, there is only ONE belt used, on either the front set of pulleys or the back set. The front set of pulleys (closest to the engine) yield a tine speed of about 200 RPM, and forward motion is about 40% faster than when the belt is on the low range (back set of pulleys.) In low range, tine speed is about 146 RPM.

If you will click on "My Page" after my name in the heading of this reply and send me an email, I will send you some more information. Also, why not sign up to accept email through this forum? I've been here about 10 years, accepting email, and have never been spammed from this site.

It has been my experience that folks who post a problem on the day they sign up with the forum usually don't find their way back, or at least never respond. If you've lost track of the web site, here's the address to the page, but you will get this message ONLY if you elected to have responses emailed to you directly from GardenWeb.

http://forums2.gardenweb.com/forums/load/tools/msg031840539747.html


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here