Return to the Tool Shed Forum | Post a Follow-Up

 o
idler pulley confusion

Posted by Jack07 none (My Page) on
Sat, Mar 1, 14 at 22:27

I have a Dynamark 8/26 gear drive 2 stage snow blower model #5361-2500 code 9219. Last winter i blew the motor. After getting another engine i tore down my snowblower and didnt pay attention to how the auger idler pulley system came off and cannot figure out right way to reinstall it.I can still use but auger is running continuos can you steer me to a pic of one assembled or exsploded view? I am attatching a pic of what i mean.


Follow-Up Postings:

 o
RE: idler pulley confusion

What I can tell you need the back or wide side of the belt against the idler pulley.
Mike


 o
RE: idler pulley confusion

Might be help here

Here is a link that might be useful: drive belt assembly


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here