Troy Bilt Tiller
warrior1
13 years ago
More Discussions
Hi Folks, hoping for some help
I own a troy bilt tiller purchased new back in the 70's (unsure of exact year). Originally a 7hp Kohler Horse model, SN 197252. Model number unknown. During the first ground breaking this year the transmission developed a bad leak at the front belt pulley. Upon dissasembly I discovered that the main shaft had over 1/4" of end play which destroyed the front seal. The rear tine bronze gear was very worn and the gear oil had a definite gold hue. Also the rear bearing for the main shaft had disintegrated and chewed up the back end of the main shaft. At a minimum I need the the main shaft, bronze gear, and all related bearings and seals.
Now my questions: To get the proper parts if available I'm told I need to know the model number which I don't know. Also when rebuilding this transmission what is the allowable main shaft end play (if any) and how is it adjusted?
Thanks in advance
drafted72
Related Professionals
Citrus Heights Landscape Architects & Landscape Designers · Milwaukee Landscape Architects & Landscape Designers · Prairie Ridge Landscape Architects & Landscape Designers · Mount Wilson Landscape Architects & Landscape Designers · Apollo Beach Landscape Contractors · Fair Lawn Landscape Contractors · Fort Mill Landscape Contractors · New Braunfels Landscape Contractors · Oklahoma City Landscape Contractors · Palos Verdes Estates Landscape Contractors · Wilton Landscape Contractors · Golden Valley Landscape Contractors · Baileys Crossroads Landscape Contractors · Layton Decks, Patios & Outdoor Enclosures · Vandalia Decks, Patios & Outdoor Enclosures