Return to the Tool Shed Forum | Post a Follow-Up

 o
Devilbliss GB 5010 5000 watt generator

Posted by michael434445 none (My Page) on
Sat, Apr 27, 13 at 10:00

I have a 5010 generator that will not generate power....I took the back cover off...found 2 winding ends loose on the exciter...the other 2 windings on the other side are soldered to a bolt...do the other 2 windings connect on the other side/
Thank you very much
Mike


Follow-Up Postings:

 o
RE: Devilbliss GB 5010 5000 watt generator

I am not sure which wires you are describing. Sounds like your two loose wires should connect to the "bridge rectifier", maybe it overheated and the two wires that appeared to be bolted down are actually connected to melted spade lugs. That's what happened to my GB5000, which may be very similar to your model. Colors of the wires and/or a picture would help if possible.

This post was edited by dwbdave on Sat, May 18, 13 at 18:48


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here