Return to the Tool Shed Forum | Post a Follow-Up

 o
Echo string trimmer won't start

Posted by dottyinduncan z8b coastal BC (My Page) on
Wed, Apr 16, 14 at 11:52

I bought this one a couple of years ago on advice from this forum that Echo was a good brand. Last year, a handyman was using it to cut long grass and "it quit". I took it to the repairman as it was still under warrantee and after a few pulls it started. This spring, it won't go. Given that I am not mechanical and will have to pay for any repairs, is there any easy things I can try first?


Follow-Up Postings:

 o
RE: Echo string trimmer won't start

Read the manual. Especially the part covering stating the engine.


 o
RE: Echo string trimmer won't start

Echo is a quality brand. If a perusal of the manual doesn't resolve your issue, you might take a look at the Mechanic In a Bottle thread on the Lawn Mower Forum.


 o
RE: Echo string trimmer won't start

1. Did you leave untreated fuel in it during the off season?
2. Are you using fresh treated fuel now vs the old?
3. Prime it with fresh treated fuel/mix and it might fire and continue.
4. I fired a neighbor’s mower today that w/n fire after removing the old fuel (with water visable).


 o
RE: Echo string trimmer won't start

thanks guys. I'll get my handyman to try again.


 o
RE: Echo string trimmer won't start

I followed up with the neighbor that I fired up the MTD mower for that had visible water in the fuel.

1. That new mower has to be the bottom of the MTD line that showed no quality.
2. The power was in CC vs HP (new to me). Oil dip stick was at the base and hard to get to.
3. I told her it needed oil but to find out what type and what the increments on the stick represent.
4. “You mean it uses Oil” which I thought she was confusing with mix, until she mentioned electric.
5. She has seen the last on my donated time even though they donated Red Oak and older mower.
6. I hate to say that I think some people take pride in not caring for their equipment vs others.
7. The Red Oak should re-stock the dent I put my restocked 4 cords when I thought winter was over.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here