Return to the Tool Shed Forum | Post a Follow-Up

Straight vs. curved trimmer

Posted by drewguy (My Page) on
Mon, Apr 25, 11 at 12:14

I've been looking at string trimmers, and have seen that the more "advanced"/pro models typically have a straight shaft rather than curved at the end.

Is there an advantage to this style over the "homeowner" style with a curved shaft?

Follow-Up Postings:

RE: Straight vs. curved trimmer

IMO yes the straight shafts alow you to get under objects further, easier, and with less bending. Also, IMO the straight shaft covers more area with less bending or reaching. I would take straight shaft over curved every time.

Only advanage I see with curved shaft don't have the 45 degree joint gears to wear out, but I have never had problem with gear joint. had one long enough to regrease, but the gears/bearing/housing inside looked very good for 7 years of use.

RE: Straight vs. curved trimmer

Original post is just what the mass market manufacturers wanted to hear. Twenty years ago, all of the cheaper trimmers were curved shaft, and all straight shaft were professional. The cheap guys (MTD, McCulloch, Homelite, Weedeater, etc.) then figured out how to make a straight shaft for a few dollars more. Now people think they're getting commercial when they buy straight shaft, but they are getting hosed.

Echo, Stihl, and Shindawa make high end curved shaft trimmer. Tanaka (TAS) and TMC also made high quality curved shaft trimmers, but TMC is straight shaft only now. The Tanaka TBC-225C is also the longest (52") curved shaft made. Price is about $180 vs $200 for TBC-225 straight shaft. Stihl also offered a long curved shaft.

Also, $90 to $130 won't get it done. That price point leaves you with cheap, mass market curved or straight shaft equipment. Either machine is basically a throw-away.

Pro quality curved shafts will cost you $180 and up. Next step is straight shaft, but with flexible drive shaft, about $25 to $50 more. These are good for trimming, but most manufacturers don't recommend using a blade. Top of line commercial will be straight shaft with solid steel drive shaft. Figure $250 to as much as $500.

As for gears wearing out in a straight-shaft, that won't happen if you maintain cirrectly. The pro straight shafts use hardened steel gears and ball bearings on the shafts. The cheap curved shaft machines only use a bushing, which needs even more maintenance (on a per hour basis) and will wear out even if lubricated.

Lastly, almost all trimmer engines rotate the same way, so a curved shaft will rotate clockwise at the trim head (looking down from above), while a geared head rotates CCW. Not a big deal, but some people have trouble going back and forth from one machine to another due to rotation differences. I think Tanaka was the only curved shaft to have engine rotate opposite so their curved shaft head spun same as their straight-shafts.

RE: Straight vs. curved trimmer

Rather concise overview GG . :)

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here