1. I suggest U-Bolting a trailerâÂÂs coupler to the handle to match your Lawn TractorâÂÂs Tow Ball. Two U-Bolts, one on handleâÂÂs pull and extension.
2. Better! Offset a plate below or above the existing tongue allowing optional use, U shaped (U-Bolted to connect with a Pin & Cotter)
3. Please show a Picture with the handle close to the tractorâÂÂs towing area.

Here is how the Duroworx 1200 is made and it works fine both ways.
{{gwi:302250}}

slowpoke_gardener: That is a good example of what I had in mind of universal (without excessive work). There might be kits out there for various carts or easily fabricated (as seen).

Good Luck!

Thanks for the suggestions. I foune at Amazon what appears to be a direct replacement for my carts handle that can be uaed for hand pulling as well as a lawn lawn tractor.

Please post Pic and Etc of what you found at Amazon. This might help others!!! Plus, I would like to see and compare posted info.

Thanks!

Gorilla Carts offers a conversion replacement handle for $20.00 to fit their wagons. I suppose it could be modified to fit a NT model. The good thing about it, is the handle can be turn 180 degrees allowing either one to pull in a straight line with the wagons frame.

{{gwi:302251}}{{gwi:302252}}

The previous post lists the pull handle that I ordered from Amazon. Gorilla Carts GOR-HDL-DOS Will let you know how it works.

I received my replacement handle today and it is an exact replacement, ony difference is color. The current one was red and the new one is black. The new handle appears to be stronger made.