Return to the Tool Shed Forum | Post a Follow-Up


Posted by JohnBarbieri none (My Page) on
Wed, Apr 18, 12 at 14:27

Hello, I have a K2400 and it worked perfectly. Well a friend asked to borrow it and when I went to use it about 6 months later there was a problem. All hoses connected, I start the engine and pull the handle and it works perfectly. I let go of the handle and pull the handle again and there is no pressure. I remove the spray handle from the hose and re-attach and pull the handle and it works. let go and repress, no pressure. Any suggestions???

Follow-Up Postings:

RE: Karchar

Never mind, I figured it out. The unloader valve was stuck, removed and lubed it up and it works like a champ.

Happy Power washing,

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here