Return to the Tool Shed Forum | Post a Follow-Up

Troy-Bilt Chipper Help

Posted by mikemerk (My Page) on
Fri, May 6, 11 at 10:13

I have a Troy-Bilt Chipper Model 420. There are 3 stationary (welded?) bolts attached to the Inner Flail Housing Assembly where the Lower Chipper Chute Assembly attaches. Two of the three bolts have snapped. What are my options: 1)purchase a new Inner Flail Housing Assembly (don't really want to do that) or 2)drill out the stationary bolts and replace. Is there anyway of getting these bolts out without drilling them out?

Thanks, Mike

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here