|
Thu, May 6, 10 at 10:48
| I own a 1989 8hp tomahawk chipper/shreader and I'am looking for a belt for it. the model number is(15014) serial number is(W840359) and part number is (W5L290SPL). this info all comes from the original manual,would appreciate any help I could get. Thank You: |
Follow-Up Postings:
|
| Don't know what yr model mine is. I just bought it last weekend and it had a belt that was waaay too narrow. Tried a B-27 power transmission belt from my local brg and v belt store. It worked OK for a little while and shredded. I think it was a little too long and overheated due to the backwards wrap around the clutch idler pulley. I got a B-26 this time and it seems to be holding up well. HTH, Mike |
|
| You can match up the belt at an auto parts store if ypou happen to have have the correct old one. What I did was to go on ebay and look up chipper /shredder / mulchers and found a couple venders who sell the belt we need. It cost me about 15.00 for the belt and I bought new flails and chipping blade while I was at it. I love these old machines (I use mine several times a week) and I'm glad that the parts we need are still available. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.