|
Sat, May 16, 09 at 11:41
| I tried a google search and wasn't successful.
Does the low speed screw adjust gas flow or just admit more air to the high speed side? |
Follow-Up Postings:
|
| Go to Zama.com or Walbro.com IMO they have very good illistrations and explainations. |
|
| It varies from carb to carb. Mikuni 2-cycle carbs like on motorcycles and ATVs etc. have a low speed air screw for mixture control but most of the outdoor power equipment stuff has a fuel screw for low speed. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.