Return to the Tool Shed Forum | Post a Follow-Up

 o
Troy Bilt Chipper RMS + Belt

Posted by blue_steel1 NJ (My Page) on
Sat, May 15, 10 at 15:37

I inherited a Troy Bilt Chipper Shredder, Model # 11390 w/ a B&S 8 HP motor.

1. It takes 5 or 6 attempts to engage the hammers, no matter how slow I move the clutch lever. I move the lever like honey in January and it still bogs down the engine and usually stalls. I have let the engine warm up for 3 or 4 minutes, the carb was rebuilt last summer, fuel is fresh, air filter is new... not sure what to do. Its designed to run at high rpms and there is no throttle adjustment. As the engine slows, it appears that the governor regulates the engine and increases rpms when there is load from the chipper. Any ideas / suggestions?

2. Anyone know the proper belt for this machine (generic is fine)?

Thanks.


Follow-Up Postings:

 o
RE: Troy Bilt Chipper RPMs + Belt

Sorry, I meant RPMs


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here