Return to the Tool Shed Forum | Post a Follow-Up

2 cycle oil

Posted by bckskin2 5 Il (My Page) on
Sat, May 28, 11 at 19:09

The oil for my new string trimmer & chain saw are both .50, but my old one were .23? can I use the sam oil just in different quantities?

Follow-Up Postings:

RE: 2 cycle oil

FWIW, I run 32:1 in all of my 2 cycle equipment.

This is what older equipment usually called for. I'm not quite sure what you mean by ".50" and .23". I'm assuming 50:1 and 32:1

I also have some 40+ year old 2 cycle equipment that requires 20:1 because they use bushings instead of needle bearings on the rod. These oldies get their 20:1 so they don't burn up.

Also make sure your oil is rated for two cycle air cooled equipment.

RE: 2 cycle oil

Running 20:1 or 16:1 is no longer required with todays new Premium Oils . Even 32:1 is potentially asking for long term harm with economy 2-stroke oil due to carbon deposits and potential engine overheating issues . Normally 50:1 is more than adequate for even high performance applications. I have small engine units over 50 yrs old that are running very well with original rings and pistons with oil ratio usage of 50 :1 with syntetic amsoil . If you were to choise cheaper economy mineral based 2-stroke oil then purhaps 40:1 may give you added piece of mind .

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here