Return to the Tool Shed Forum | Post a Follow-Up

Montgomery Ward Fronf Tine Tiller

Posted by keathley (My Page) on
Sat, May 1, 10 at 19:17

I have an old Montgomery Ward tiller and I need to know belt size and configuration of the rear belt that runs the reverse. Model # is GIL 1580E S# 47-56447

Follow-Up Postings:

RE: Montgomery Ward Fronf Tine Tiller

According to my manual for Gilson 1580F the forward belt is 1/2 x 35, and the reverse belt is 3/8 x 37.

The reverse belt gets a 1/2 twist to reverse direction. Hard to explain, but the drawing in the manual is pretty clear.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here