|
Sun, May 17, 09 at 19:25
| I didn't see anything on this problem with our garage door opener. We've re-programmed the remotes and done just about everything we can think to do, including changing the battery, but the remotes will only operate inside the garage and about 3 feet outside the garage. Any ideas? Thank you for any help. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, May 18, 09 at 9:57
| Have you added anything new to your house or garage? Some electrical things will interfere with the opener and cause this problem. If so try unplugging them and check. If not your receiver is going bad which is part of the logic board. Costs around $80.00 |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.