Troy Bilt Horse Drive Shaft Bearings
gildomilo
15 years ago
Related Stories
SMALL KITCHENS12 Ways to Make Your Kitchen Look and Feel Bigger
Try these clever design moves to get more storage and create a roomier feel
Full StoryMore Discussions
I took my horse apart because the front transmission seal was leaking. When replacing it I noticed that the drive shaft had 1/2-1" of play. So I bought some new bearings and put them in the machine. When I took the drive shaft out I noticed the rear worm gear on the shaft had a clean surface worn into the back of it maybe 1/4" deep. I'm wondering if I need to replace the worm gear,because it's causing too much slop in the drive shaft? I put 8 shims in and it's still got some play in it!!!
Any idea if a welded driveshaft is compatible with one that's multiple pieces?
Mine is very old and non welded, so I think I can get a replacement worm gear for it, or maybe I can get a spacer bushing from a local bearing warehouse?
Steven Laurin & Company
gator_rider2
Related Professionals
Citrus Heights Landscape Architects & Landscape Designers · West Chester Landscape Architects & Landscape Designers · Edmond Landscape Contractors · Del Aire Landscape Contractors · Desert Hot Springs Landscape Contractors · Mission Landscape Contractors · Oakland Landscape Contractors · Siloam Springs Landscape Contractors · West Chester Landscape Contractors · Palmetto Decks, Patios & Outdoor Enclosures · Spokane Decks, Patios & Outdoor Enclosures · Sugar Land Decks, Patios & Outdoor Enclosures · Seguin Home Builders · Vista Park Home Builders · Stanford Home Buildersken72