Return to the Tool Shed Forum | Post a Follow-Up

 o
Stihl 028 No Start

Posted by ms24 CT (My Page) on
Sat, May 15, 10 at 22:24

My Stihl 028 won't start. It ran fine last month. So far, the following has been tried:
1. I've replaced the coil and plug. There is a strong spark.
2. I sprayed fuel into the carb.
3. I've pulled the kill wire.
4. I checked the flywheel key. It is fine.
5. I tried new fuel.

The saw won't even sputter. The piston is moving up and down as it should. I can't figure it out. With spark and fuel, it should do something. Any ideas?


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here