Return to the Tool Shed Forum | Post a Follow-Up

scotts (noma) mini tiller

Posted by oldhouseboater (My Page) on
Sun, May 6, 07 at 22:45

Have a Scotts Turfmaster NOMA built mini tiller
Serial C(or E)1016000 first number hard to make out.
SERIAL S009829330999 Code 4098

I need to know the part# of the gear box as I need to replace it. Would also like to find a parts manual.

Tried outdorparts and others but couldnt find any info.


Follow-Up Postings:

RE: scotts (noma) mini tiller

  • Posted by canguy British Columbia (My Page) on
    Mon, May 7, 07 at 9:01

Noma was Murray which is now owned by Briggs and Stratton. You would probably be further ahead replacing the tiller, they are very inexpensive.

RE: scotts (noma) mini tiller

I was told a gearbox is 75 bucks new but I cant find anybody who has one. This little tiller has given me exceptional service. I like the Tecumseh engine because it starts so easy so I would like to fix it.

RE: scotts (noma) mini tiller

The Noma name hasn't been used for so long its doubtful anything was available even prior to Briggs obtaining Murray. Briggs is not supporting part past 97. Your best bet is Ebay or finding it used somewhere. Perhaps a similar unit with a blown engine.

Like Canguy said they were not expensive units. If you like the Tecumseh TC engine I think there are still some brands using them.

RE: scotts (noma) mini tiller

Found pictures and parts at Parts and Service dot com

RE: scotts (noma) mini tiller

I have a Scotts Turfmaster tiller, model no. E1016000, S/N S00274833099. I need the tine shaft with the bronze gear in the center that coincides with the worm gear. I've searched the web with no luck so far can you steer me in the right direction, I don't know the year model it was given to me when my wife's Aunt passed away, but it's a great little tiller and has worked great for several years now at least until today.
Thanks for any help, elliott-50

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here