|
Sun, Jun 13, 10 at 9:26
| U have a Karcher power washer k2400hh *which I LOVE*. I recently had a problem with lack of high pressure - which I diagnosed and fixed by removing and lubricating the valve with Plumbers grease; I also ordered 2 replacements valves as a backup - and also - have additional O-Rings that apparently need replacement from time to time.
MY QUESTION: I have NEVER been able to get the soap suction tube to work with anything - any tip I used or position of the suction indicator - never has yielded results. Any suggestion? blitz02@verizon.net |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.