Return to the Tool Shed Forum | Post a Follow-Up

2150 poulan chain saw

Posted by jeffchap none (My Page) on
Fri, Jun 7, 13 at 10:31

My poulan 2150 will not start. OK here goes with things I have done. I have replaced 3 coils and all the fuel lines. Rebuilt carb. Replaced ground and kill wires. I have tried air gap at 25 and 15. Compression checks at 120psi. This unit will not fire with starting fluid. I have replaced 3 spark plugs and set gap at 25. I have watched flywheel and air gap clearance for possible bent crankshaft. I have an identical 2150 that I have rebuilt and it runs fine. I am about to start swapping parts from it. Is there a reed valve that I am overlooking? Anyone up for solving this problem?

Follow-Up Postings:

RE: 2150 poulan chain saw

No reed valve in your engine. It is piston ported.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here