Return to the Tool Shed Forum | Post a Follow-Up

 o
ryobi weed wacker

Posted by lizzieboxer ny (My Page) on
Sat, Jun 5, 10 at 11:23

I have a gas Ryobi weed wacker. The actual trimmer connection, when snapped into the upper part, does not turn properly. Sometimes the trimmer works...then other times it just slows completely down. It is getting gas, the motor is running fine. It seems that the trimmer connection is not seating properly in the motor part. I thought that perhaps a new trimmer connection would remedy the problem but it has not. The new trimmer head does not spin properly either. Any suggestions?


Follow-Up Postings:

 o
RE: ryobi weed wacker

  • Posted by canguy British Columbia (My Page) on
    Sat, Jun 5, 10 at 12:36

The cable in the lower section may be stripped at the end where it engages the upper shaft. Can you post the model number? There were two manufacturers of these units.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here