Return to the Tool Shed Forum | Post a Follow-Up

 o
How to disassemble Okatsune pruners?

Posted by anontemp123 (My Page) on
Wed, Jun 18, 14 at 12:32

I have the Okatsune pruners shown here: http://conifersociety.org/wp-content/uploads/ColbyPruners.jpg

On my Fiskars, I can easily remove the nut, but this one is shaped very oddly, as if it's not meant to be removed. The nut is curved on top and there's very small surface area where it squares out, if that makes sense. Does anyone have experience disassembling Okatsune pruners?


Follow-Up Postings:

 o
RE: How to disassemble Okatsune pruners?

Makes sense. For the this type of nut is called a Stover Nut. Much like an Acron with the top removed.

Channel-Locs, Vise Grips, 12 point socket or a Cresent wrench should all be able to remove the nut with ease.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here