Return to the Tool Shed Forum | Post a Follow-Up

 o
stihl FS 90-new carb.highlow adjust tool

Posted by Nicole1977 none (My Page) on
Wed, Jun 18, 14 at 14:06

so the local dealer put a new carburetor on my fs 90, well it will start but doesnt stay running, so I tried to adjust the carb.. WRONG they changed the heads on the high low adjustments screws no more little flat head screw driver, they made this them a tiny female allen wrench, like a very thin walled tiny socket.. and I need to know where to get a tool like this


Follow-Up Postings:

 o
RE: stihl FS 90-new carb.highlow adjust tool

Take it back, they should adjust it for free beings they didn't adjust it right when the installed the NEW CARB. They will have the tool to do it with.... Or you have other problems and the new carb didn't do a thing depending on why you had the carb. replaced?

There is reason the went to the new tool. TO KEEP the owner from tinker with the adjustments. I'll let some else explain the reason.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here