Return to the Tool Shed Forum | Post a Follow-Up

 o
Chain Saw trouble

Posted by zauggster Colorado (My Page) on
Thu, Jun 10, 10 at 15:25

I have a Husqvarna 41 chain saw. It has the following behavior: If I get it out, set the choke, pull a couple of times, it fires. Push in the choke, pull the cord, it will run just fine. Cut things, all is well, it can be stopped and restarted instantly, until most of a tank of gas is gone. Then it dies. At that point I can hear what sounds like boiling gasoline, a fizzling noise. It will then start with the throttle all the way open, as if it were flooded, but it will only run for 2 seconds, then die. If I pull it once with the choke on, and then do the throttle wide open, it will rev for 2 seconds again. I have seen on this forum great advice. Have any of you some great advice for me? Thanks


Follow-Up Postings:

 o
RE: Chain Saw trouble

What you describe could be a "vaporlock", has not been
a comon problem for some yrs. Take it to a high press.
air hose, blow all vents cleen, Oily sawdust dose not
cool very well!
Later ,, codger "al >


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here