Return to the Tool Shed Forum | Post a Follow-Up

 o
Need Husqvarna Mini Tiller Parts

Posted by jim_mcnabb (My Page) on
Thu, Jun 11, 09 at 17:15

I have a Husqvarna CT20 mini tiller (the 98-01 model). The tiller runs fine but the brass gear on the shaft with the tines has stripped.

Unfortunately you can't buy a replacement brass gear or a new tine shaft w/ gear, you have to buy an entire new transmission.

If anyone has one of these tillers sitting around with a dead engine and would be interested in parting it out please let me know.

I hate to throw the tiller away just because it has one bad part, that seems pretty wasteful.

Thank you.

Jim M


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here