|
Fri, Jun 29, 12 at 18:14
| Having a lot of trouble with subject clutch.
If the two screws holding the clutch "arms" are too tight the clutch won't close. If loose enough for the arms to close, the whole thing shakes loose. Any advise appreciated. |
Follow-Up Postings:
|
| Please share a close picture showing the matter. Sounds like a lack of locking with lock-tight or etc. I just disassembled a locked-up trimmer to see why. Every bolt had to be twisted at least .25" and you could see signs of lock-tight, torquing bolts that all seemed excessive. When vibration is a known matter, there has to be some type of restrictions. Good Luck! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.