Return to the Tool Shed Forum | Post a Follow-Up

 o
Tecumseh HH60 70's recoil problem

Posted by skyler25 OH (My Page) on
Sat, Jun 12, 10 at 19:30

Hi, I am new to the group and glad it is here. I am having a problem with the black Philips screw that holds the silver cap over the starting pawl or dog. I am having carb problems so I get kick back which puts a strain on everything including me. The screw has a spring under it and a spring pin with some plastic slid over it. The pin drives right into the center of the screw after tightening it. It keeps coming loose after several pulls. Is there something missing? What could cause this? The dog comes out ok when pulling and retracts ok too. I'll move on to other mysteries with this engine later. Thanks for any help.SkylerOkeefe9


Follow-Up Postings:

 o
RE: Tecumseh HH60 70's recoil problem

The pin doesn't need to be there. If the screw comes loose, a small amount of loctite carefully placed on the screw threads will help.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here