Return to the Tool Shed Forum | Post a Follow-Up

Homelite Vac Attack II leaf blower

Posted by ronman1425 WI (My Page) on
Wed, Jun 9, 10 at 20:30

Does anyone know what to set the gap between the flywheel and the ignition module? The model number is UT08544. Thanks.

Follow-Up Postings:

RE: Homelite Vac Attack II leaf blower

  • Posted by canguy British Columbia (My Page) on
    Wed, Jun 9, 10 at 22:51

With the module over the magnets, slip a business card in the space and loosen the screws. Tighten the screws then turn the flywheel to release the card.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here