Return to the Tool Shed Forum | Post a Follow-Up

ExCell Pressure Washer

Posted by tomdorr (My Page) on
Mon, Jun 20, 11 at 21:22

I have an Excell XR2500 that is about 8 yr old.
It wasn't drawing chemical into the pump so I took off the chemical injector. O ring had gone bad so I replaced.
I lost the ball bearing that goes in the injector and got another. It had a short spring with it.
Is the spring used with this model (devibliss pump)?
What goes in first, the spring or the ball bearing?


Follow-Up Postings:

RE: ExCell Pressure Washer

Maybe Excell themselves have the answer, check them out.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here