Return to the Tool Shed Forum | Post a Follow-Up

 o
older craftsman mower

Posted by cfl129 tn. (My Page) on
Tue, Jun 22, 10 at 21:42

I have a 22 h p craftsman mower that won't start with the key.I have had the ign.switch,pto switch,safety switch at cluch/brake and seat switch checked checked solenoid still won't start with key. when i start it by touching the 2 terminals on solenoid it will start,but when release brake or pull pto switch it kills engine any suggestions


Follow-Up Postings:

 o
RE: older craftsman mower

Where to start maybe to define "checked" more specifically. Plus posting your 917# from below the seat would be helpful. Do you have 12v at one small solenoid terminal and ground at the other when cranking? There is an actual tractors forum as well. If everything has truly checked out, maybe an OP relay?


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here