Return to the Tool Shed Forum | Post a Follow-Up

Karcher K 520M Problem - Help

Posted by Zagrot none (My Page) on
Wed, Jul 10, 13 at 8:03

The problem I'm having is knowing which way two parts go into the Cylinder Head. They both have holes at each end one like a pin size head and one bigger. Please see photo.

Part 11 - Throttle.
Part 12 - Joining Piece.

They look the same - Is it pin size hole facing out or in. Same question on both.

Can anyone help?.

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here