|
Fri, Jul 31, 09 at 9:37
| Hi, I have an older horse model and it is leaking gear lube where the protective main shaft tube connects to the transmission housing. I've looked at the parts manual and it does not show any seals nor how the tube that protects and houses the lube and main shaft for the drive operation of tines is held or connected to the transmission. Any help would be appreciated. |
Follow-Up Postings:
|
- Posted by sleepysentry (My Page) on Wed, Aug 5, 09 at 0:47
| That's an expensive model. Mind if I ask how old it is and how well it has served you? I'm in the market for a rototiller but spend enough time at the shop with my Jaguar as it is. Considering the cost of replacing a model like the Horse, why not just take it to a dealer and get it fixed correctly? |
Here is a link that might be useful: Toro Tiller
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.