Return to the Tool Shed Forum | Post a Follow-Up

troy-bilt chipper

Posted by JVBull none (My Page) on
Wed, Jul 20, 11 at 11:25

I bought a used Troy-Bilt chipper model CS4210 (10HP). Chipper starts on first pull and chips like a demon...but it does not pull branches into chute...I must aggressively push each in and down for chipping. Is this normal? If not, what needs fixing/replacing. Thanks much for ideas.

Follow-Up Postings:

RE: troy-bilt chipper

If the blades are sharp you have to hold the wood back to keep from stalling the engine.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here