Return to the Tool Shed Forum | Post a Follow-Up

 o
Garden Way Tiller

Posted by lippy00 Pa (My Page) on
Mon, Jul 19, 10 at 13:42

I have a old garden way rear tine tiller there are no model or serial # that I can find. The question that I have is the tines will swing about 15 degrees right or left is this the way it should be? It looks like someone tried to tack weld it into place but it broke loose, can anyone give me any information.


Follow-Up Postings:

 o
RE: Garden Way Tiller

  • Posted by baymee LehighValleyPA (My Page) on
    Mon, Jul 19, 10 at 20:03

Explain a little better. Is it a PTO model with a lever on the left side "engage and Disengage tines"


 o
RE: Garden Way Tiller

No. It has cable and a lever to engage the drive for the wheels, the tines are connected with a round tube from the gear case and it swivels at the gear case, I haven't taken it apart to see if there is anything broken it does not seem it should be loose.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here