Return to the Tool Shed Forum | Post a Follow-Up

 o
Question re: Green Machine 2500

Posted by Weagle046 none (My Page) on
Sat, Jul 20, 13 at 19:18

I have an older Green Machine model 2500 and I would like to find the proper contact gap setting (points). Any information you could provide would be appreciated.

Thanks.


Follow-Up Postings:

 o
RE: Question re: Green Machine 2500

Please post a picture of your Green Machine model 2500 or a link to it. Attached is my Green Machine I have and can not find a model on it. I’ll be surprised if this trimmer has points due to an electronic component on the exterior. It is old enough to have point. I have not pulled the flywheel.


 o
RE: Question re: Green Machine 2500

It turns out my machine doesn't have points. Thank you!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here