Return to the Tool Shed Forum | Post a Follow-Up

Ridgid SP-500P Sump Pump

Posted by cranheim (My Page) on
Mon, Jul 27, 09 at 20:41

This may be the wrong place to post about sump pumps, but I thought I would try it anyway. I was going to purchase a RIDGID SP-500 sump pump with a "Lifetime Warranty" from Home Depot. Being careful to look at the fine print, it clearly stated in the warranty section it had a "Full Lifetime Warranty". It is warranted to free of defects in workmanship and material. That sounded good to me. However, I also found a section in the manual that listed three items listed under "Suggested Replacement Parts Schedule". The Switch and float were to be replaced every two years, and the motor at 5 years. I called Tech Support to ask if there was any connection to the Suggested Replacement Parts list and the Lifetime Warranty. I was told I had to replace the parts as scheduled to maintain the Lifetime Warranty. Basically, I would have to replace the float and switch twice, along with the motor within the first 5 years, at my expense, whether it needed it or not, to validate the warranty. I think that is false advertising and probably dishonest. This certainly gives me something to think about before buying RIDGID products. Charles Ranheim

Follow-Up Postings:

RE: Ridgid SP-500P Sump Pump

  • Posted by canguy British Columbia (My Page) on
    Tue, Jul 28, 09 at 0:53

There is a big difference between 'defects in workmanship and materials' and normal wear. Any machine will wear out and better to maintain a pump than have it quit when you need it most. No point phoning for warranty service at 3 a.m. on a Sunday with a flooded basement.

RE: Ridgid SP-500P Sump Pump

I agree parts do wear out. However, in my case, my sump pump only comes into play two or three times a year. I still think it is wrong to claim it has a Full Lifetime Warranty without mentioning the fact the "Suggested Maintenance Schedule" is required to satisify the warranty.
They also state the parts replacement should be performed by an authorized service person. This would mean I would be paying more for the required maintenance (I may not even need) than I paid for the pump in the first place. This just does not set very well with me. Charles Ranheim

RE: Ridgid SP-500P Sump Pump

The Ridgid SP-500 uses the same top switch as the Campbell Hausfeld model 50CHF. I've had both of these pumps and both have had the top switch wear out on me after 12-18 months. The switch fails such that the pump will either not switch on (luckily has a watchdog installed) or will not switch off (risking burning out the motor). I wrote to Ridgid last time and they sent me a free replacement. Today I have another failure. I think it's time to shop for a pump with a more reliable switch. I don't like pressure switches either since the diaphragm wears out causing the same problem.

RE: Ridgid SP-500P Sump Pump

My plumber friend told me not to buy a rigid, said their best pump was not as good as the cheapest competitors model. I thought he was exagerating, so I bought one, paid over 300.00, it stopped turning today, 13 months later. I reconected my 7 year old 120.00 mastercraft, tomorrow I will go to home depot to exchange it for an other piece of crap. The moral of the story, dont buy a sump pump until you talk to someone who installs them, and listen to what they tell you.

RE: Ridgid SP-500P Sump Pump

i have a rigid sp-500p pedistal sump pump, the switch was not shutting pump off when crock was empty. home depot doesn't carry replacement switches. so being in a bind i went to my local hardware store and the guy told me to use a switch off a wayne pedistal pump part#56396 for $18.99. got home pulled off the old switch. guess what? it was the same identical switch. wayne parts are easy to find around here. so i hope it will help someone else out too!

RE: Ridgid SP-500P Sump Pump

I also had a problem with my SP-500 after about 2 years. I found the pump running continuously. I had to go out and buy another pump because I couldnt wait until rigid sent me a new switch. I bought a watchdog backup sump pump system and seems to work fine. Now I just use the repaired rigid as a backup to the backup.

Here is a link that might be useful: 12v sump pumps

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here