Return to the Tool Shed Forum | Post a Follow-Up

Hand drill parts

Posted by rockguy 6 (My Page) on
Thu, Jul 8, 10 at 20:45

I am looking for the 2 internal jaw pieces that go to a hand brace drill. You know the old "brace and bit"-type drill. My good one was stolen, I got one with missing teeth, it's the kind that has 2 notched jaw pieces that go inside the chuck. Email me if you know where I can get them, please or even if you have a complete brace you'll sell or swap. I'm in TN so don't wanna pay postage from Taiwan or somewheres......thanks to all.

Follow-Up Postings:

RE: Hand drill parts

Lemme look, I have a couple bit braces in my shop...somewhere. They are all pretty much the same in design. Just curious, why do you use a bit brace, instead of an elctric drill?

RE: Hand drill parts

Sorry andyma, didn't see your reply. I want to use the brace in an area with no electric service and no generators. I did get a whole brace from ebay, thanks.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here