Return to the Tool Shed Forum | Post a Follow-Up

 o
Weed pullers

Posted by dmullen Southern CA (My Page) on
Mon, Jul 24, 06 at 20:48

Last weekend, Paul James showed 3 weed pullers on his TV program. I have one of them but would like to get one like the one he showed with a "corkscrew" on the end that is twisted into the ground around the weeds.

Anyone know where to find one of these or what they are called?

Thanks


Follow-Up Postings:

 o
RE: Weed pullers

I saw that program too. I use a "Weed Hound" and think it's easier and less messy than anything he was using. I don't have to spend time twisting and pulling, etc. The "Hound" just pushes into the ground over the weed and pulls the root with a small plug of dirt... hit the knob and the plug/weed is ejected.

If he'd have given the trade names it would make finding them easier. Check out the link below for the tools... Good luck finding them.

Here is a link that might be useful: Show #1206 Weeding tools HGTV


 o
RE: Weed pullers

Another vote for the Weed Hound...it rawks.


 o
RE: Weed pullers

I bought a Weed Hound at Home Depot this afternoon and it is the best weed puller I have ever used so far. Thanks


 o
RE: Weed pullers

  • Posted by memo Zone 4B Nebraska (My Page) on
    Sat, Mar 21, 09 at 19:49

Here is the cork screw type...

Here is a link that might be useful: Ergonica


 o
RE: Weed pullers

  • Posted by
    dana centrella
    (danac@cox.net) on
    Thu, Apr 14, 11 at 12:38

Hi, I'm Dana, inventer of a new weeding tool that is being manufactured for first delivery in May. Please go to our web site at www.sticknkick.com. You will be amazed how easy and fun this tool is. I would appreciate any feedback from you. It will need to be marketed and I need ideas. thank you very much.


 o
RE: Weed pullers

I bought one also but I am not that happy with it, its not quite as sturdy as one hoped..nevermind there are plenty more I guess

Here is a link that might be useful: weed puller


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here