Return to the Tool Shed Forum | Post a Follow-Up

Weed pullers

Posted by dmullen Southern CA (My Page) on
Mon, Jul 24, 06 at 20:48

Last weekend, Paul James showed 3 weed pullers on his TV program. I have one of them but would like to get one like the one he showed with a "corkscrew" on the end that is twisted into the ground around the weeds.

Anyone know where to find one of these or what they are called?


Follow-Up Postings:

RE: Weed pullers

I saw that program too. I use a "Weed Hound" and think it's easier and less messy than anything he was using. I don't have to spend time twisting and pulling, etc. The "Hound" just pushes into the ground over the weed and pulls the root with a small plug of dirt... hit the knob and the plug/weed is ejected.

If he'd have given the trade names it would make finding them easier. Check out the link below for the tools... Good luck finding them.

Here is a link that might be useful: Show #1206 Weeding tools HGTV

RE: Weed pullers

Another vote for the Weed rawks.

RE: Weed pullers

I bought a Weed Hound at Home Depot this afternoon and it is the best weed puller I have ever used so far. Thanks

RE: Weed pullers

  • Posted by memo Zone 4B Nebraska (My Page) on
    Sat, Mar 21, 09 at 19:49

Here is the cork screw type...

Here is a link that might be useful: Ergonica

RE: Weed pullers

  • Posted by
    dana centrella
    ( on
    Thu, Apr 14, 11 at 12:38

Hi, I'm Dana, inventer of a new weeding tool that is being manufactured for first delivery in May. Please go to our web site at You will be amazed how easy and fun this tool is. I would appreciate any feedback from you. It will need to be marketed and I need ideas. thank you very much.

RE: Weed pullers

I bought one also but I am not that happy with it, its not quite as sturdy as one hoped..nevermind there are plenty more I guess

Here is a link that might be useful: weed puller

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here