Return to the Tool Shed Forum | Post a Follow-Up

Honda Tiller Tine hint

Posted by oneoldurn GA7 (My Page) on
Tue, Jul 13, 10 at 21:10

Don'know if this has been posted earlier but if you have touble losing those expensive spring clips that hold the tines on the shaft, a 2-3 inch piece of SS safety wire or solid hardware wire or 12-14 ga copper house wire (slipped into the shaft holes and bent like the letter S)works great. I cut a few spares and put them into a prescription bottle taped to the tiller frame.

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here